Paint Information Guide
Product Information
Water based
Low VOC
Application
Roller
Brush
Post Application
Drying time - 2 hours
Recoat - 4 hours
SURFACE PREPARATION
Prepare all surfaces to be clean,dry and free of any damage. Stir tin contents thoroughly before applying. For best results an undercoat should be applied before the top coat is applied. For bare plaster, Either dilute our wall and ceiling emulsion with 25% water. Another option is to use a plaster primer. For best results using furniture paint, please apply our wood primer first.
SAFETY
Keep out of reach of children. Ensure good ventilation during the application and drying. DO NOT get in eyes, on skin or on clothing. DO NOT use a spray gun for application as this may produce hazardous droplets. If on skin DO NOT use paint thinners or similar products. Wash with plenty of soap and water. If in eyes - Remove contact lenses - Rinse carefully with water for several minutes. If Swallowed - Call a doctor. Safety data sheet available on request.
CLEANING
After use remove as much as possible off of the equipment before cleaning with water. DO NOT use or store in extreme temperatures and protect from frost.
DISPOSAL
When this container is empty please recycle accordingly. Please also consider Community rePaint. DO NOT empty into drains or watercourses. Harmful to Dispose according to National and local regulations.